Product Description: INS-1009-1 is a substrate for a polyimide, with a permanent acrylicpressure-sensitive adhesive, suitable for thermal transfer printing of thewhite-coated surface of the label, is designed for printed circuit boards orrelated electronic components used on the characters or Logo and barcode labeldesign. It is in circuit boards and SMT, DIP during wavesolder or reflow to ensure that all kinds of extreme harsh application environment to maintain excellence in the performance of an ideal material.
Parameter specifications:
Product structure
Printed White INK
Polyimide Film
Acrylic Adhesive
Glassine Paper Release Liner
Features
Features
Item
Test Method
Test Result
Thickness
Total Thickness
ASTM1000
95（±5）um
Ink Thickness
20（±3）um
Base Film Thickness
50（±3）um
Adhesive Thickness
20（±5）um
Viscous
Stick to Stainless steel
20min(ASTM-3330)
≥35N/100mm
24min(ASTM-3330)
≥42N/100mm
Stick to PCB board
20min(ASTM-3330)
≥25N/100mm
24min(ASTM-3330)
≥40N/100mm
Stick
ASTM D2979 test POLYKEN probe paste one second, from one centimeter per second
≥1000g
Flammability
UL certification
UL testing Standards
UL Certification
Period
In the packaging state and less than 27 ℃ at room temperature and relative humidity of 60 percent of the preservation of the environment more than one year
Note：The above testing of samples has not been printing performance. The following test is to use Zebra 90xi, Printers use RICOH B 110C (Ricoh), or by the R 6000 ribbon printing samples. Samples in the following designated environmental testing:
Heat resistance
Temperature Performance
265 ℃ conditions in the baking 10 minutes
No visible impact
Chemical solvent-resistant
Solvent resistance performance
1/4 IPA，3/4 ethanol for 3min
No visible impact
Terpene Flux for 3min
No visible impact
10% Sodium hydroxide solution for 3min
No visible impact
100 o C in the ionized water for 10 minutes
No visible impact
82 o C under 99 percent of isopropanol in 10 minutes
No visible impact
Note
According to MIL-STD-202G/883E standards, will be designated on the samples of chemical solvents immersion 3 min, then gently brush 10 times to observe the surface change.
Statement
The data is based on the Corporation'sgeneral understanding of product characteristics, the only reference to generalinformation; customers can not be used as the basis for the design andspecifications. INNOV ‘S Customers purchasing the products should be in thepractical application of conditions from the test to decide whether to apply.INNOV to the buyer assurance that the products in the materials and processes,not bad.
中文版
English